PLT Export for SolidWorks is a HPGL Plot PLT file export add-in for SolidWorks®. This add-in gives SolidWorks the ability to export geometric data from a SolidWorks drawing document to a HPGL PLT file.

PLT Export for SolidWorks reads curve data from a SolidWorks drawing document and converts it into corresponding pen movements in a HPGL Plot file. PLT Export for SolidWorks supports the following HP plotters:

    Hewlett-Packard 7475A
    Hewlett-Packard 7550A
    Hewlett-Packard 7580B
    Hewlett-Packard 7585B
    Hewlett-Packard 7586B
    Hewlett-Packard Draftmaster 1 (7595A)
    Hewlett-Packard Draftmaster 2 (7596A)
    Hewlett-Packard Draftpro (7570A)
    Hewlett-Packard Draftpro-DXL (7575A)
    Hewlett-Packard Draftpro-EXL (7576A)

PLT Export for SolidWorks is designed to work with the following versions of SolidWorks:

• SolidWorks 2013 (32 & 64 Bit)
  
  
• SolidWorks 2012 (32 & 64 Bit)
  
  
• SolidWorks 2011 (32 & 64 Bit)
  
  
• SolidWorks 2010 (32 & 64 Bit)
  
  
• SolidWorks 2009 (32 & 64 Bit)
  
  
• SolidWorks 2008 (32 & 64 Bit)
  

PLT Export for SolidWorks is very easy to use. Once installed, it automatically loads itself into SolidWorks and adds a new submenu called "PLTExport" to the SolidWorks menu.

System Requirements

Below is the hardware, software and operating system requirements for SolidWorks add-ins running on the Microsoft Windows platform. 

• SolidWorks (32 Bit and 64 Bit): 2008, 2009, 2010, 2011, 2012 and 2013
  
  
• Operating System (32 Bit and 64 Bit): Windows XP SP2 or later, Windows Vista and Windows 7
  
  
• RAM: 1 GB (Recommended 2 GB)
  
  
  

Download & Purchase

Please download a fully functional trial of PLT Export for SolidWorks by clicking on the "Download Now" button below. To start using the software, you need a license key. A license key can be of two types: Trial or Permanent. A trial key is issued to you on the purchase of '7 day license' so that you may try the software before you purchase a permanent key. A permanent key is issued after you have purchased a license. We are confident that during the trial period (7 days with unlimited runs) you will find PLT Export for SolidWorks extremely useful. Later when you decide to buy the software please return to this page and click the "Buy with/without Subscription" button to place your order. Upon verifying the order you will recieve an e-mail with instructions on how to obtain your permanent key. We will create and send you your Key by e-mail within one business day. To avoid disruption in your workflow we urge you to place your order before the trial period ends.

		3.05 MB
		$29.99
		$345
		$295

IMPORTANT! Purchasing a Subscription is highly recommended since it the most cost effective way of keeping your software up to date. Moreover, Subscription entitles you to get a second free perpetual license for your laptop, among many other benefits. For details please read the SYCODE License and Subscription Frequently Asked Questions (FAQ).

Our licenses are single computer licenses and are locked to each computer they are installed on. Basically, the license key is specific to the computer's Host ID (the MAC address of the computer), and will not work on another computer. The installer picks up the physical MAC address of the network card connected to the computer which is basically “Ethernet adapter Network Connect Adapter”. So unless you change your network card, the key will always work even if you reinstall your operating system. If your internal network is periodically assigning a different Host ID to your computer, then please find a solution for this with your IT department.

Note: Downloading this software indicates your acceptance to the SYCODE Software License Agreement. The price mentioned above is for a single user license. For your bulk-licensing needs please contact us.

Installation & Usage

Since PLT Export for SolidWorks is an add-in for SolidWorks, it must be loaded into the SolidWorks environment before it can be used. Please follow the simple instructions in the PLT Export for SolidWorks ReadMe document which is copied into the installation folder. After you have loaded the add-in file into SolidWorks, Simply click on the menu items in the "PLTExport" sub menu to run these new commands. Truly, software made simple!

The 'PLTExport' menu consists of the following commands:

• Export - Export objects to a PLT file
  
  
• Help - Display the PLT Export for SolidWorks help file
  
  
• Register - Register your copy of PLT Export for SolidWorks
  
  
• About - Display the PLT Export for SolidWorks About box

PLT Export for SolidWorks comes with detailed documentation for each command as well as a tutorial to get you started in the shortest possible time.
 

HPGL is the Hewlett-Packard Graphics Language designed for specifying 2D graphical information for the HP range of plotters. It was not intended as an interchange format but some software suppliers use it as such. HPGL is a command set embedded in the ROM of pen plotters to help reduce the work required by applications programmers to create plotted output. HPGL uses two-letter mnemonics as instructions for drawing lines, circles, text, and simple symbols. HPGL is the primary printer control language used by Hewlett-Packard plotters. It later became a standard for almost all plotters.

Customization

If you want PLT Export for SolidWorks to work in a different way to suit your workflow, do let us know. We will customize the add-in to suit your specific needs.