PIX Import for Bricscad is a Dr. Picza (.pix) file import plug-in for Bricscad®. This plug-in gives Bricscad the ability to import geometric data from ASCII and Binary PIX files.

PIX Import for Bricscad reads surface and polygon mesh data stored in PIX files and imports it into Bricscad. If the PIX file contains a scan of a surface, PIX Import for Bricscad creates the wireframe of the surface in Bricscad. The wireframe may be created as a set of points, lines, polylines, splines, 3D faces or a polygon mesh. If the PIX file contains the scan information in the form of a polygon mesh, PIX Import for Bricscad recreates the mesh model inside the active Bricscad drawing. The mesh can be recreated as set of points, lines, polylines, 3D faces or a polyface mesh.

PIX Import for Bricscad is very easy to use. Once installed, it must be loaded into the Bricscad environment. There are simple instructions for this in the ReadMe file. Once loaded it adds new commands to Bricscad's existing commands and a new submenu called "PIXImport" to the Bricscad menu containing these newly added commands.

System Requirements

Below is the hardware, software and operating system requirements for Bricscad plug-ins running on the Microsoft Windows platform. 

• Bricscad (32 Bit only): 8, 9, 10 and 11
  
  
• Operating System (32 Bit only): Windows XP SP2 or later, Windows Vista and Windows 7
  
  
• RAM: 1 GB (Recommended 2 GB)

Download & Purchase

Please download a fully functional trial of PIX Import for Bricscad by clicking on the "Download Now" button below. To start using the software, you need a license key. A license key can be of two types: Trial or Permanent. A trial key is issued to you on the purchase of '7 day license' so that you may try the software before you purchase a permanent key. A permanent key is issued after you have purchased a license. We are confident that during the trial period (7 days with unlimited runs) you will find PIX Import for Bricscad extremely useful. Later when you decide to buy the software please return to this page and click the "Buy with/without Subscription" button to place your order. Upon verifying the order you will recieve an e-mail with instructions on how to obtain your permanent key. We will create and send you your Key by e-mail within one business day. To avoid disruption in your workflow we urge you to place your order before the trial period ends.

		1.19 MB
		$4.99
		$179
		$149

IMPORTANT! Purchasing a Subscription is highly recommended since it the most cost effective way of keeping your software up to date. Moreover, Subscription entitles you to get a second free perpetual license for your laptop, among many other benefits. For details please read the SYCODE License and Subscription Frequently Asked Questions (FAQ).

Our licenses are single computer licenses and are locked to each computer they are installed on. Basically, the license key is specific to the computer's Host ID (the MAC address of the computer), and will not work on another computer. The installer picks up the physical MAC address of the network card connected to the computer which is basically “Ethernet adapter Network Connect Adapter”. So unless you change your network card, the key will always work even if you reinstall your operating system. If your internal network is periodically assigning a different Host ID to your computer, then please find a solution for this with your IT department.

Note: Downloading this software indicates your acceptance to the SYCODE Software License Agreement. The price mentioned above is for a single user license. For your bulk-licensing needs please contact us.

Installation & Usage

Since PIX Import for Bricscad is a plug-in for Bricscad, it must be loaded into the Bricscad environment before it can be used. Please follow the simple instructions in the PIX Import for Bricscad ReadMe document which is copied into the installation folder. If you accept the default values in the installer, PIX Import for Bricscad will be up and running within a minute. However, if you choose to modify the values (for example, install the software at a location other than the default) then you will have to take extra care to see that Bricscad and the PIX Import for Bricscad plug-in are properly setup and recognize each other. For an easy and straight forward installation, simply run the installer and accept the default installation options.  After you have loaded the plug-in file into Bricscad, simply click on the menu items in the "PIXImport" submenu to run these new commands. Truly, software made simple!

The 'PIXImport' menu consists of the following commands:

• PIXImport - Imports a PIX file
  
  
• PIXImportHelp - Displays the PIX  Import for Bricscad help file
  
  
• PIXImportRegister - Registers your copy of PIX Import for Bricscad
  
  
• PIXImportAbout - Displays the PIX Import for Bricscad About box
  
  

PIX Import for Bricscad comes with detailed documentation for each command as well as a tutorial to get you started in the shortest possible time.

The PIX File Format

The PIX file format is the native file format of a digitizer software called Dr. Picza which comes bundled with Roland DG digitizers. The digitizer scans an object and transfers the 3D point data to the Dr. Picza software which saves it in the PIX file format. PIX files can contain scan data in two formats: surface and polygon mesh. The surface format is used when the top surface of an object is being digitized, whereas the polygon mesh format is used when the entire surface of an object is being digitized.

Customization

If you want PIX Import for Bricscad to work in a different way to suit your workflow, do let us know. We will customize the plug-in to suit your specific needs.