|
Home >
Products >
MeshCAD for Rhino >
Help
>
Command Reference > MCAddFace
MeshCAD for Rhino - Mesh creation, editing and modeling plug-in for Rhinoceros
|
Menu Button |
MeshCAD >
Face > Add |
|
Command |
MCAddFace |
This command
adds a triangle
or quad face
to a mesh.
The orientation of the added face is determined by the
Right
Hand Rule.
To add a face
1. At the Select
mesh prompt, select the mesh to which faces have to be added.
2. At the Face
1, Select first vertex location prompt, select the first vertex
location.
3. At the Face
1, Select second vertex location prompt, select the
second point.
4. At the Face
1, Select third vertex location prompt, select the
third point.
5. At the Face
1, Select fourth vertex location, Press Enter for 3 sided face prompt,
select the fourth point or press Enter
to add a triangle face.
6. To add another face to the same mesh,
At the Face 2, Select first vertex location
prompt, select the first vertex point and repeat step 3, 4 and 5 or press
Enter to exit.
Fig.A shows a
mesh with a hole.
Fig.B shows the
added face.
Note:
·
To
deselect a chosen face, press Control
and click the face.
Related commands
Please feel free to call or email us for more information about mesh creation, editing and modeling plug-in for Rhinoceros. |
