DXF Import for Solid Edge is an add-in for Solid Edge


Installation:
=============
The installer adds DXF Import for Solid Edge to the list of available add-ins installed for Solid Edge. To verify whether DXF Import for Solid Edge has been properly loaded into Solid Edge invoke the "Add-In Manager" by clicking on the "Applications" menu, then "Add-Ins" and finally "Add-In Manager". Verify that "DXF Import for Solid Edge" is present in the list of "Available Add-Ins" and make sure that its check box is checked.

Now DXF Import for Solid Edge is ready for use.


Usage:
======
DXF Import for Solid Edge adds new commands to Solid Edge. It also adds a submenu to the Solid Edge menu called "DXF Import for Solid Edge" containing these new commands. This submenu is located in the Applications -> Add-Ins submenu. Simply click on the menu items in this sub menu to run these new commands.

The new commands are:
1) Import - Imports a DXF file
2) Help - Display the DXF Import for Solid Edge help file
3) Register - Display the DXF Import for Solid Edge product registration dialog box
4) About - Display the DXF Import for Solid Edge about box"

Note: The "DXF Import for Solid Edge" submenu is available only when a document (part, assembly, etc.) is open. This is due to the way Solid Edge is designed.


Support:
========
For support, please E-Mail support@sycode.com